Perle Systems Speed LE 1P - Manual (Page 35)

Host Card Back Panel Connectors and Pinouts
Page 35
SPEED LE RJ45 Back Panel Connectors and Pinout
The following diagram shows the SPEED2 LE and SPEED4 LE RJ-45 cards back panel.
The RJ45 connector has a 10-pin configuration. If you require an 8-pin connector
configuration, use the pinouts in the RJ45 8-pin column. The connector pinout for each RJ45
socket fitted to the SPEED LE cards is as follows;
RJ45 10-pin EIA-232 DIRECTION RJ45 8-pin
1 RI IN N/A
2 DCD IN 1
3 DTR OUT 2
4 DSR IN 3
5 GND 4
6 TXD OUT 5
7 RXD IN 6
8 RTS OUT 7
9 CTS IN 8
10 N/A
Shell C-GND Shell