Perle Systems Speed LE 1P - Manual (Page 47)

Connector Box and Cable Pinouts
Page 47
RJ45 Connector Box
Note
The SPEED LE connector box cable needs to be secured or supported in case of
sudden contact or excessive weight on the cables. Please ensure that adequate
caution is taken to avoid possible damage to the SPEED LE card or Host system. This
can be accomplished by securing the cable to a rack or to the back of the server.
RJ45 10-pin RJ45 8-pin EIA-232
1 N/A RI
2 1 DCD
3 2 RTS
4 3 DSR
5 4 TXD
6 5 RXD
7 6 S-GND
8 7 CTS
9 8 DTR
10 N/A NC
Shell Shell C-GND
Connect peripheral
cable here via RJ45
Push fit onto card
edge connector
RJ45 connector block