Panasonic DP-C306 - Manual (Page 30)

30
Chapter 2 Sc
an/Email Operations
8
Select a computer, and then select
“OK”.
z Only one station can be selected at a time.
9
Select “OK”.
10
Select “Cc”, “Bcc”, or “From”, and
then perform steps 4 to 9.
z If the Function Parameter “145 Sender
Selection” (Fax/Email Settings > Fax
Parameters) is set to “Valid”, you can preset
up to 25 sender names. You can select from
the sender list when sending an Email.
However, if you select “From” on the Email
screen, the sender list will not be displayed.
For more details on this setting, refer to Fax/
Email Settings in the Operating Instructions
(For Function Parameters) of provided
CD-ROM.
11
Enter the subject if necessary.
z If the Function Parameter “32 Default
Subject” (Fax/Email Settings > User
Parameters) has been set, the information is
added to the subject line for all outgoing
Emails without having to input it manually.
For programming instructions, refer to Fax/
Email Settings in the Operating Instructions
(For Function Parameters) of provided
CD-ROM.
Select “Subject”.
Enter a subject, and then select “OK”.
z Up to 40 characters can be entered.
z For instructions on how to enter characters,
refer to Using the Keyboard in the
Operating Instructions (For Function
Parameters) of provided CD-ROM.
12
Select “Close”.
z For the following steps, refer to steps 9 to 11
in Scan to Email (see page 28).