Panasonic DP-C306 - Manual (Page 63)

63
Chapter 3
Scanner Settings
„ Job Build
This is useful for scanning multiple sets of originals that exceed the maximum capacity of the ADF of
100 sheets (20 lb/Letter). (See the example below.)
Ex: To make quality adjusted scanning of 115-sheet of originals.
(a) Place the first 100 sheets of originals on the ADF.
(b) Select “Basic Menu”, and then select “Job Build and SADF”.
(c) Select “Quality Adj.”, and then select the desired quality adjusting end result.
(d) Press the Start key.
(e) After scanning the first 100 sheets, you can place the remaining 15 sheets of originals on the ADF
within 5 seconds to continue scanning without interrupting the cycle. If you do nothing, the
machine will display the message “Another original?”.
( f ) Place the remaining 15 sheets of originals on the ADF, and then select “Yes”.
(g) After scanning the remaining 15 sheets, the message “Another original?” will be displayed. Select
“No” to start the next process.
z Original should be placed on the ADF.
z Up to 999 sheets of originals can be scanned in one job. The maximum capacity of the scanned data can be
reached prior to attaining 999 sheets of originals depending on the type of sheets being scanned. If the memory
becomes full during scanning, follow the instructions on the display.
100
1
115
1
115
101
Originals:100 sheets <1st scan>
Originals: Remaining 15 sheets <2nd scan>
The 1st and 2nd scanned data
are combined into one job.
115-sheet quality adjusted scan
images are completed.