Panasonic DP-C306 - Manual (Page 48)

48
Chapter 3
Scanner Settings
Chapter 3
Scanner Settings Setting the Scanning Quality
Documents, whether in full color or monochrome, are scanned in three-colors.
z The Color mode settings are reset to their factory defaults when:
- The Reset key is pressed.
- The Auto Reset Time interval has lapsed (default = 1 min).
- The power is turned OFF.
- A scan job is completed.
1
Press the Scan/Email key.
2
Select “Basic Menu”.
3
Set the desired scanning modes.
Quality Adjustment
„ Color Setting
1
Select the color mode, and then select
“OK”.
z If the above screen is not displayed, see
steps 1 to 3 on the left column.
Quality Adj. (see pages 48 to 56)
File Type and Name (see page 58)
Original Size:
From Platen Glass only.
When the original size is not correctly
detected, select “Original Size”, and select
original size, and then select “OK” on the
display.
2-Sided Original (see page 60)
Job Build and SADF (see pages 62 to 63)
Multi-Size Feed:
When scanning mixed size originals, select
“Multi-Size Feed”.
Ex: 8.5" x 11" and 11" x 17" size originals
Full Color Mode
Color Original Three-colors
(Red, Green
and Blue)
Grayscale Mode
Color Original Grayscale
(Halftone)
Black Mode
Color Original Monochrome
(Bi-level)
Monochrome Original Monochrome
(Bi-level)