Paradyne 7924 - Manual (Page 8)

v 7924-A2-GB20-30 October 1997
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to set up, configure, and operate HotWire
Model 7924-A1 T1 HDSL termination units. It is designed for central office
technicians or network engineers who have an understanding of the deployment
of digital subscriber line systems in a telephone company or private network
environment.
HotWire 7924 may be ordered either as a standalone unit (7924-A1-xxx) or as a
nest-mounted card (7924-B1-xxx) that fits in a HotWire 7900 nest. This guide
describes the installation and maintenance procedures for the standalone
version, Model 7924-A1-xxx.
Document Summary
Section Description
Chapter 1 About HotWire Model 7924 Termination Units. Describes the
features of each version of the Model 7924, and typical
configurations.
Chapter 2 Installing the Unit. Describes how to install the unit and
make connections.
Chapter 3 Using Terminal and Switchpack Modes. Provides
instructions for connecting a VT100-compatible terminal
user interface. Also describes how to make manual
configuration changes directly on the board hardware.
Chapter 4 Customizing DSX-1-Compatible Units. Provides instructions
for modifying configuration options by using the terminal
interface or DIP switches and jumpers on the board.
Chapter 5 Customizing V.35-Compatible Units. Provides instructions
for modifying configuration options by using the terminal
interface or DIP switches and jumpers on the board.