Pioneer Elite SC-07 - Manual (Page 59)

The System Setup menu 08
59
En
1 Select ‘THX Audio Setting’ from the Manual SP
setup menu.
2 Select either ON or OFF for THX Loudness Plus
setting.
3 Specify the distance of your surround back speakers
from each other.
• 0–1 ft – Surround speakers within 1 foot apart.
• >1– 4 ft – Surround speakers between 1 and 4 feet
apart.
• 4 ft < – Surround speakers more than 4 feet apart
(default).
4 Specify whether your subwoofer is THX Ultra2/
Select2 1 certified or not.
If your subwoofer isn’t THX Ultra2/Select2 1 certified, but
you still want to switch boundary gain compensation on,
select
YES here, but the effect might not work properly.
5 Select either ON or OFF for Boundary Gain
Compensation setting.
6 When you’re finished, press RETURN.
You will return to the Manual SP Setup menu.
Note
1 Ultra2 for the SC-07, Select2 for the SC-05.
4a.Manual SP Setup
A/V RECEIVER
Exit Return
1. Surr Back System
2. Speaker Setting
3. Channel Level
4. Speaker Distance
5. X-Curve
6. THX Audio Setting
A/V RECEIVER
Exit Finish
Loudness Plus : ON
SB SP Position : 4 ft<
BGC : OFF
THX Ultra2 SW : YES
4a6.THX Audio Setting
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
Loudness Plus : ON
SB SP Position : 4 ft<
BGC : OFF
THX Ultra2 SW : YES
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
Loudness Plus : ON
SB SP Position : 4 ft<
BGC : OFF
THX Ultra2 SW : YES
Loudness Plus : ON
SB SP Position : 4 ft<
BGC : OFF
THX Ultra2 SW : YES
A/V RECEIVER
Exit Finish
4a6.THX Audio Setting
SC07-05.book Page 59 Friday, April 25, 2008 11:59 AM