Pioneer DEH-P3100UB - Manual (Page 38)

2 Turn MULTI-CONTROL to select a list.
Phone book
—MISSED CALLS (missed call)—
DIALED CALLS (dialed call)
—
RECEIVED CALLS (received call)
# For more details about the Phone Book list,
refer to Using the phone book on the previous
page.
# If no phone numbers are stored in the se-
lected list,
NO DATA is displayed.
3 Press MULTI-CONTROL to display a
name list of the selected call history.
4 Turn MULTI-CONTROL to select a phone
number.
# If the phone number is already in the phone
book, the corresponding name is displayed.
# You can also change the phone number by
pushing
MULTI-CONTROL up or down.
5 Press MULTI-CONTROL to make a call.
# For an international call, press and hold
MULTI-CONTROL to add + to the phone number.
Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1 Use MULTI-CONTROL to select
NUMBER DIAL in the function menu.
2 Press MULTI-CONTROL to display the
number input screen.
3 Turn MULTI-CONTROL to select a num-
ber.
# You can also perform the same operations by
pushing
MULTI-CONTROL up or down.
4 Press MULTI-CONTROL to move the cur-
sor to the next position.
# Up to 24 digits can be entered.
# You can also perform the same operation by
pushing
MULTI-CONTROL right.
5 When you completed entering the
number, press and hold MULTI-CONTROL to
make a call.
Call confirmation appears.
# If a 24-digit phone number is entered, press
MULTI-CONTROL. And then press and hold
MULTI-CONTROL to make a call.
Clearing memory
1 Use MULTI-CONTROL to select
CLEAR MEMORY in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select an item.
PHONE BOOK (phone book)
—MISSED
(missed call history)
—DIALED (dialed call his-
tory)
—RECEIVED (received call history)—ALL
(delete all memory)
# If you want to clear the Phone Book and
dialled/received/missed call history list, select
ALL.
# If guest phone is connected to this unit via
Bluetooth wireless technology,
PHONE BOOK
cannot be selected.
4 Press MULTI-CONTROL to determine
the item that you want to delete.
5 Turn MULTI-CONTROL to select
CLEAR MEMORY:YES.
Clearing memory is now on standby.
# To cancel, select CLEAR MEMORY:NO.
6 Press MULTI-CONTROL to clear the
memory.
While clearing,
CLEARING is displayed. After
the data on the selected item is cleared,
CLEARED is displayed.
# If the clearing memory fails, ERROR is dis-
played.
Setting automatic rejecting
1 Use MULTI-CONTROL to select
REFUSE CALLS in the function menu.
Available accessories
En
38
Section
06