Pioneer DEH-P3100UB - Manual (Page 39)

2 Press MULTI-CONTROL to turn auto-
matic call rejection on.
# To turn automatic call rejection off, press
MULTI-CONTROL again.
Setting automatic answering
1 Use MULTI-CONTROL to select
AUTO ANSWER in the function menu.
2 Press MULTI-CONTROL to turn auto-
matic answering on.
# To turn automatic answering function off,
press
MULTI-CONTROL again.
Switching the ring tone
1 Use MULTI-CONTROL to select
RING TONE in the function menu.
2 Press MULTI-CONTROL to turn the ring
tone on.
# To turn the ring tone off, press
MULTI-CONTROL again.
Echo canceling and noise reduction
1 Use MULTI-CONTROL to select
ECHO CANCEL in the function menu.
2 Press MULTI-CONTROL to turn echo can-
celing on.
# To turn echo canceling off, press
MULTI-CONTROL again.
XM tuner
Listening to XM Satellite Radio
You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
For details concerning operation, refer to the
XM tuner
’s operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner
’s operation manual.
! With this unit, you can operate two addi-
tional functions: XM channel direct selec-
tion and preset channel list.
% Selecting an XM band
Press
BAND/ESC.
# Band can be selected from XM1, XM2 or
XM3.
% Selecting a channel
Push
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)
Switching the XM display
% Press DISP/BACK/SCRL to switch the
XM display.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Press /LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The XM preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the ordinary display, press
BAND/ESC or
/ LIST.
Available accessories
En
39
English
Section
06