Pioneer DEH-P3100UB - Manual (Page 46)

Function name Operation
REPEAT
Refer to Selecting a repeat play
range on page 15.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the multi-CD
player are:
! MCD – Repeat all discs in the
multi-CD player
! TRACK – Repeat just the cur-
rent track
! DISC – Repeat the current disc
RANDOM
Refer to Playing tracks in random
order on page 15.
SCAN
Refer to Scanning folders and
tracks on page 15.
PAUSE
Refer to Pausing playback on page
15.
Notes
! To return to the previous display, press
DISP/BACK/SCRL.
! To return to the main menu, press and hold
DISP/BACK/SCRL.
! To return to the playback display, press
BAND/ESC.
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks begins again.
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
1 Use MULTI-CONTROL to select
COMP/DBE in the function menu.
# If the multi-CD player does not support
COMP/DBE,
NO COMP is displayed when you at-
tempt to select it.
2 Turn MULTI-CONTROL to select the de-
sired setting.
OFF
—COMP 1—COMP 2—OFF—DBE 1—
DBE 2
3 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been cancelled before
determination, operation is settled.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs. (With
multi-CD players sold before the CDX-P1250
and CDX-P650, up to 24 tracks can be stored
in the playlist.)
Creating a playlist with ITS programming
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Use MULTI-CONTROL to select
ITS MEMORY in the function menu.
3 Press MULTI-CONTROL to display the
setting mode.
4 Turn MULTI-CONTROL to select the de-
sired track.
5 Press MULTI-CONTROL to select
MEMORY.
# If DELETE is displayed, turn MULTI-CONTROL
to display
MEMORY.
Available accessories
En
46
Section
06