Panasonic 524X07801B - Manual (Page 167)

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98 167
• Message Wait Callback: If a callback message has been left by another extension, you can
press the MSG key to place an automatic callback to that extension. If more than one callback
message has been received, pressing the MSG key performs auto-callback in the order
received.
• Priority Message Wait Callback (One-Touch Voice Mail Access): You can press the MSG
key to automatically access your voice mailbox. The phone will dial your voice mailbox and
send access codes (if programmed) for retrieving new messages.
Operation
To automatically call back an extension that left a message or to access Voice Mail:
Hardware Requirements
• N/A
Related Programming
• FF8-1: Voice Mail ID Code
Considerations
• The Message lamp lights when a message has been received.
• If more than one callback message has been received, pressing the MSG key performs auto-
callback in the order received.
• The MSG key works only when the phone is idle or receiving internal dial tone.
• Auto-callback is always enabled for large display phones.
• Messages are accessed in a first-in, first-out order for Message Wait, except Priority Message
Wait, which is typically sent by Voice Mail.
Message Waiting / Callback
CPC-96, CPC-288, and CPC-576 All Versions
Description
If you try to call an extension that is busy or does not answer, you can leave a message wait indication
at that extension, requesting a return call.
Action Result
1. Press the MSG key. Automatically call back to extension
OR...
Automatic access to Voice Mail