Panasonic 524X07801B - Manual (Page 186)

186 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
SSD Names:
To set SSD names using a large-display or small-display phone:
Example 1. Large-display phone
To enter D:
a. Press the first soft key on the top left.
Action Result
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 1 for the SSD Name Assignment mode. SSD NO.=>
SSD NAME displays
5. Enter the speed dial bin number (00-79 or 000-799).
6. Press the HOLD key. -SSDXXX
A B C D E F XXX displays (where XXX
= specified SSD bin number)
7. Press the FLASH key to clear the current data. A B C D E F XXX displays (where XXX
= specified SSD bin number)
8. Enter the speed dial name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
186.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 188.)
9. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 186.
• See “Example 2. Small-display phone” on page 188.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
10. Repeat steps 8-9 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
11. Press the HOLD key when finished. Next SSD bin number displays
12. To enter another speed dial name, press the CONF key and
repeat steps 5-11.
SSD NO.=>
SSD NAME displays