Panasonic 524X07801B - Manual (Page 84)

84 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
Set System Speed Dial Index
Description
For a description of System Speed Dial (SSD), see “System Speed Dial” on page 181 for a Digital
Key Telephone, “System Speed Dial” on page 240 for a Digital Single Line Telephone (DSLT), and
“System Speed Dial” on page 283 for a Single Line Telephone (SLT).
Operation
To set SSD index using either a large-display or small-display phone:
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry. Next SSD bin number displays
13. To set additional SSD names, press the volume up or down
key or press the HOLD key to move to the desired SSD.
Desired SSD bin number displays
14. Repeat steps 9-13 until all SSD names are entered.
15. Press the AUTO key to exit the entry mode. Enter SSD # displays
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 02.
3. Press the HOLD key. 8102-
SSD Assignment displays
4. Enter 2.
Action Result