Panasonic AG-HSC1UP - Manual (Page 27)

27
VQT1F36
Before using
≥4 GB (or more) Memory Cards that do not have
the SDHC logo are not based on SD Memory
Card Specifications.
≥Use this unit to format SD cards. If an SD card
is formatted on other products (such as a
computer), the time spent for recording may
become longer and you may not be able to use
the SD card. (l 79) (Do not format it on a PC
etc.)
≥When the write-protect switch A on SD Card is
locked, no recording, deletion or editing will be
possible on the card.
≥Keep the Memory Card out of reach of children
to prevent swallowing.
≥A MultiMediaCard cannot be used on this unit.
ª (SD Speed Class
Rating Class 2)
This indicates a Class 2 rating in the high speed
standards (SD Speed Class) stipulated by the
SD Card Association for high speed writing
between SD compatible products and SD
Memory cards.
If you use a Class 2 card compatible with the SD
Speed Class in an SD compatible product, you
can obtain stable recording by using an SD card
conformed with Class 2 or more.
ª Handling precautions
≥Do not expose the terminals of the card to
water, garbage or dust.
≥Do not place in the following areas:
– In direct sunlight.
– In very dusty or humid areas.
– Near a heater.
– Locations susceptible to significant
difference in temperature (condensation can
occur).
– Where static electricity or electromagnetic
waves occur.
≥To protect cards, return them to their cases
when you are not using them.
4
A
VQT1F36_ENG_PP.book 27 ページ ２００７年２月２６日 月曜日 午前１１時２９分