Panasonic AG-HSC1UP - Manual (Page 49)

49
VQT1F36
Recording
≥If the [PICT. QUALITY] is set to [ ],
mosaic-pattern noise may appear on a
playback image depending on the picture
content.
≥While this unit accesses the SD card ( is
displayed/the card access lamp is lit), do not
perform the following operations. The SD card
or the recorded data may be damaged.
– Turn the unit off.
– Open the card slot cover and remove the SD
card.
– Operate the mode dial.
≥Other products may degrade or not playback
still pictures recorded on this unit.
≥The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before
printing.
ª About the screen indications
only when the PHOTO SHOT
button is pressed halfway
A Flash ( l 57)
B Flash level ( l 58)
C Red eye reduction ( l 58)
D Quality of still pictures
E Size of still pictures
F Remaining number of still pictures
(Flashes in red when [0] appears.)
G Card indication ( l 108)
H MEGA optical image stabilizer ( l 59)
ª About the focus indication
≥The focus indication indicates the status of the
auto focus.
≥The focus indication does not appear in manual
focus mode.
≥Focus on a subject manually when it is not
easily focused automatically.
≥You can record still pictures on the card even if
the focus indication does not appear, but
pictures may be recorded without being
focused.
≥The focus indication does not appear or has
difficulty displaying in the following cases.
– When the zoom magnification is high.
– When the unit is shaken.
– When the subject is moving.
– When the subject stands in front of a light
source.
– When close subjects and far subjects are
included in the same scene.
– When the scene is dark.
– When there is a bright part in the scene.
– When the scene is filled with only horizontal
lines.
– When the scene lacks contrast.
– When recording motion pictures
– When the MagicPix function is used.
ª Concerning the focusing area
When there is a contrasting object ahead or
behind the subject in the focus area, the subject
may not be focused. If so, move the contrasting
object out of the focus area.
≥Even when it is still difficult to focus, adjust the
focus manually.
≥The focusing area is not displayed when the
digital zoom (more than approx. 12k) is used.
2.1 750 750 750 MEGA
A BC D E F G H
VQT1F36_ENG_PP.book 49 ページ ２００７年２月２６日 月曜日 午前１１時２９分