Panasonic AG-HSC1UP - Manual (Page 88)

With other products
88
VQT1F36
5 Operate with the remote control for the TV.
1) Press the button up, down, left or right to select a scene or file to be played back, and then press
the button in the center to set it.
2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
A Operation icons
B Display operation icons
C Cancel operation icons
D Display/Cancel operation icons
≥The playback operation is performed the same as on this unit.
– Playing back motion pictures (l 68)
– Playing back still pictures (l 72)
To cancel EZ Sync TM (HDAVI Control TM )
Press the MENU button, then select [SETUP] # [EZ Sync] # [OFF] and press the cursor button.
≥If you are unsure whether or not the TV and AV amplifier you are using are compatible with EZ Sync,
read the operating instructions for the devices.
≥Available linked operations between this unit and a Panasonic TV is different depending on the types
of Panasonic TVs even if they are compatible with EZ Sync. Refer to the operating instructions of the
TV for the operations that support on the TV.
≥Operation is not possible with a cable that is not based on the HDMI standard. We recommend
Panasonic cables.
Part numbers: RP-CDHG15 (1.5 m/4.9 feet), RP-CDHG30 (3.0 m/9.8 feet), RP-CDHG50 (5.0 m/
16.4 feet), etc.
B C
D
A
1) 2)
DISPLAY ON/OFF
VQT1F36_ENG_PP.book 88 ページ ２００７年２月２６日 月曜日 午前１１時２９分