Panasonic DP-180 - Manual (Page 141)

141
S
e
tt
ing
Y
our M
ac
h
ine
024 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed : Reduce received document according to setting of
Fax Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
2 Auto
025 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print reduction
is selected on Fax Parameter No. 24.
---- ----
100 100%
026 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
027 POLLED FILE SAVE 1 Invalid Selecting whether the machine retains the polled document
in memory even after the document is polled once.
2 Valid
028 STAMP AT MEMORY
XMT
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel.)
2 Valid
030 DRD SERVICE 1 Invalid Selects whether the DRD Service is used (if available). If
this parameter is set to "Valid", your machine detects the
specified ring pattern only to receive a document
automatically.
2 Valid
031 INCOMPLETE FILE
SAVE
1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2 Valid
037 RECEIVE TO MEMORY (----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown on
the LCD display.
038 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 146)
039 PIN CODE ACCESS 1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
042 CONF. POLLED FILE
SAVE
1 Invalid Selecting whether the machine saves the confidential polled
file even after the file is polled once.
2 Valid
043 PASSWORD-XMT 1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
receiving station when transmitting.
2 On
044 PASSWORD-RCV 1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving.
2 On
046 SELECT RCV 1 Invalid Selecting whether the machine performs selective
reception. (See page 90)
2 Valid
048 TELEPHONE LINE 1 PSTN Selecting the type of line connected.
2 PBX
049 PSTN ACCESS CODE (----) Setting PSTN Access Code. (max. 4 digits)
052 DIAGNOSTIC
PASSWORD
(----) Setting the password for Remote Diagnostic Mode. Please
ask your Panasonic Authorized Dealer for details.
No. Parameter
Setting
Number
Setting Comments
Continued on the next page...