Panasonic DP-180 - Manual (Page 156)

156
Setting Your Machine
To Edit the Retrieved or Backup Phone Book Data File
■ Deleting the Entire Auto Dialler
If you wish to delete the entire Auto Dialler data in your machine, type the following command in the body of the email
message:
@command
delete
@end
This command can also be inserted before the @begin to @end block, to erase the entire Auto Dialler data first, then
reprogram it with new data.
This method will also prevent the "Overwrite Warning Message" that is sent back from your machine, when the current
Auto Dialler station is overwritten.
To erase the entire Auto Dialler data, type the following command in the "Subject" line of your email:
#set abbr(password)# : Where the "password" is the Remote Password programmed in your
machine's User Parameters.
Retrieve and backup the existing data onto your PC first by following
the procedures for Retrieving and Editing on pages 150 to 155.
(1) To : Your machine's email address.
From : This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Auto Dialler
data and for error message notification.
(Can be programmed with the configuration tool of your email program.)
Subject : To Delete data, type : #set abbr(password)#
(1)