Panasonic DP-180 - Manual (Page 176)

176
Problem Solving
Verification Stamp and Flash Memory Card
■ Verification Stamp
The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be replaced
or refilled with ink.
To remove the stamp
■ Installing the Flash Memory Card
Before installing, make sure that there is no document file(s) stored in the memory. You may confirm by printing out a
File List (see page 98). When the memory card is installed, the machine will initialize the document memory, all
contents stored in the document memory at that time will be lost.
NOTE 1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp.
1
Lift the ADF.
2
Detach the Scanning Pad from the
left side only.
4
Remove the Stamp. Replace the stamp with a new one or
refill the stamp with a few drops of the specified ink into
the back of the stamp.
Verification Stamp Order No.: DZHT000004
1 2
(1) Turn the Power Switch OFF and
unplug the Power Cord.
(2) Remove the Memory Card
Cover.
(1) Insert the Flash Memory Card gently into the card
slot with the Panasonic logo facing towards the
inside of the machine.
Caution : Installing the Memory Card in the wrong
direction may damage the connecting
pins inside the machine.
(2) Reinstall the Memory Card Cover.