Panasonic DP-180 - Manual (Page 57)

57
Int
e
rnet Fax
Fe
a
ture
s
NOTE 4. If the transmission cannot be completed for any reason, the email may be returned
undelivered; otherwise no reply will be printed.
5. For the machine to perform the email address completion the Fax Parameter No. 160
(DEFAULT DOMAIN) must be set to "Valid" and the Default Domain must be pre-
programmed in the User (Internet) Parameters. (See page 144)
6. The "QUICK MEMORY TRANSMISSION" feature is disabled if multiple stations are set.
7. Direct Transmission is not available for LAN communication.
5
Your machine can temporarily change the File Type and
File Name by using
(XMT File
Type and Name). You can select TIFF/JPEG or PDF File
Type and then change the File Name. When sending to:
Internet Fax : select "TIFF/JPEG".
PC
: select "TIFF/JPEG" or "PDF".
FUNCTION 8 6
3 Selecting the desired Transmission setting. (See page 11)
4c
4a
4b
When an original is scanned from the Platen
Glass, the message "ANOTHER ORIGINAL?" is
shown.
Place another original, then press
.
Machine starts sending.
START
6
4d
The document(s) is stored into
memory with a file number. Then
starts sending the document(s).
(Gray Scale or Colour are available only
when transmitting/emailing in PDF or
JPEG file type mode. If you are sending
in JPEG file type mode to an Internet
Fax, the receiving station must support
JPEG format.)