Panasonic KX-HCM10 - Manual (Page 58)

Operating Instructions
58
3.5.3 Name/Time
Name/Time window is used to assign a name to each Network Camera. Date
and Time entered on Name/Time window are used for the Alarm/Timer mode in
the Image Transfer feature and on the Buffered Image screen. NTP automatically
adjusts the internal clock of Network Camera.
1.
Click [Name/Time] on Setup Page.
2.
Enter the Camera Name and Date and Time. Click [Save] when finished.
• Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.
Instructions for the data fields
Camera
Name The Camera Name appears on the Single Camera screen.
• Refer to unavailable character set 1 on page 96.
• Refer to displayable character set on page 97.
Date and
Time First click [AM/PM] or [24H]. The display changes in each time
mode.
Note
Time setting will be affected by the temperature. Time
setting may lose one minute per month in 25 °C (77 °F)
condition. Use Auto Adjustment feature.