Panasonic KX-HCM10 - Manual (Page 75)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
Instructions for the data fields
a.
Buffers or transfers by the timer trigger.
b.
Active Time of Trigger
Always: always activates the timer trigger. The timer trigger interval
can be set in e. Image Buffer Frequency Setting.
Operational between: Sets the start and stop time of the primary time.
The day of the week can be set by checking. If the setting time passes
over midnight, check the check box of only the day of start time. Start
and stop time is set only in 24 h time mode.
Note
The first image is buffered or transferred at the start time. The later
images are buffered or transferred at the interval of the e. Image Buffer
Frequency Setting.
c. Secondary time is active except the primary time.
The timer trigger interval in the secondary time can be set in e. Image
Buffer Frequency Setting.
d.
Sets the image resolution and image quality.
Image resolution: 640 x 480/320 x 240/160 x 120
Image quality: Favor Clarity/Standard/Favor Motion
e.
Image Frequency: Sets the interval to send the image.
Note
Short interval of Image Buffer Frequency makes Network Camera
transfer the older images. Set the interval long enough to transfer the
images. Buffered Image screen enables you to check this setting.