Panasonic AJ-HD1400E - Manual (Page 42)

42
Setup menus
(continued)
OPERATION (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
*2 In the initial settings, the Recording Mark is not
overlapped on the HD SDI signals.
“_____” indicates the factory setting.
No./Item Description of setting
155* 1
AUTO REC
For setting whether the recording/stop is executed
automatically in conjunction with the Recording Mark
of the HD SDI input signals from our camera recorder
or not.
0000
OFF :
Do not to execute the recording/stop automatically.
0001 TYPE1 :
To execute the recording/stop automatically in
conjunction with the Recording Mark in the LTC
information added to the HD SDI.
0002 TYPE2 :
To execute the recording/stop automatically in
conjunction with the Recording Mark in the SVITC
information added to the HD SDI.
<Notes>
z Set the LOCAL/REMOTE switch to the REMOTE
position.
z For the selection of TYPE 1 or TYPE 2, refer to
“Our camera recorder, Recording format, and
Recording Mark.”
z To select TYPE 1 or TYPE 2 to start recording
automatically, set this unit to the REC PAUSE
mode. It may not operate in any mode other than
the REC PAUSE mode. After accepting the auto
stop, this unit changes to the REC PAUSE mode.
z When this unit is recording in normal operation, the
AUTO REC function is not available.
Our camera recorder, Recording format, and Recording Mark
Model Recording format
Recording
Mark TYPE
Remarks
AJ-HDC27F, H 720/ ¢¢p over 60p TYPE1
AJ-HDX400 1080/59.94i –*
2
It is possible to
switch between
TYPE 1 and
TYPE 2. TYPE-1
and TYPE-2 are
the initial
settings for the
camera recorder.
If the unit is used
with the TYPE-1
settings, set the
UB MODE of the
camera to “FRM
RATE”. If it is
used with the
TYPE-2 settings,
set the VITC UB
MODE to “FRM
RATE.”
AJ-HDX400E
1080/50i –*
2
1080/25p over 50i –* 2
AJ-HDX900
720/59.94p TYPE1
720/23.98p over 59.94p TYPE1
720/29.97p over 59.94p TYPE1
1080/59.94i –* 2
1080/23.98p over 59.94i TYPE2
1080/29.97p over 59.94i –*
2
1080/50i –*
2
1080/25p over 50i –*
2
720/50p TYPE1
720/25p over 50p TYPE1
No./Item Description of setting
160
MEMORY
MODE For setting the repeat playback mode.
0000
OFF :
No repeat playback (normal operation).
0001 M-STOP :
The tape stops near the BEGIN point when it is fast
forwarded or rewound.
0002 REPT1 :
When the tape reaches the END point, it is
rewound to the BEGIN point, and stops.
0003 CONT :
When the tape reaches the END point, it is
rewound to the BEGIN point, and plays back, and
this is done repeatedly.
161
CTL BGN
or
TC BGN For setting the BEGIN point in the repeat playback
mode.
Either TC or CTL is set as the counter display mode
using the COUNTER button.
If no mode is set, – – : – – : – – : – – appears, and the
tape start serves as the BEGIN point.
162
END For setting the END point in the repeat playback mode.
Either TC or CTL is set as the counter display mode
using the COUNTER button.
If no mode is set, – – : – – : – – : – – appears, and the
tape end serves as the END point.
163
REPT MODE For setting what images are to be output while the
tape returns to the BEGIN point in the repeat
playback mode.
0000
FREEZE :
The tape returns to the BEGIN point with the image
played back at the END point still frozen.
0001 BLACK :
The tape returns to the BEGIN point while the
screen remains black.
0002 MENU :
The tape returns to the BEGIN point following the
the settings in menu No. 140 OUTPUT.
<Note>
If the tape end is set as the END point when
“FREEZE” is selected, the playback image will not be
frozen properly.
Set the END point to a place within the range where
images are recorded.
180
BATTERY
SEL For setting the type of battery.
0000
NiCd12 :
Settings for 1 pc. 12 V battery (NEAR: 11.2 V,
END: 10.6 V)
0001 NiCd13 :
Settings for 1 pc. 13 V battery (NEAR: 12.0 V,
END: 10.6 V)
0002 NiCd14 :
Settings for 1 pc. 14 V battery (NEAR: 13.6 V,
END: 10.6 V)
0003 S-LION :
Settings for 1 pc. lithium-ion battery “BP-L90A”.
(NEAR: 11.7 V, END: 10.6 V)
0004 I-LION :
Settings for 1 pc. lithium-ion battery “ENDURA80”.
(NEAR: 12.9 V, END: 12.4 V)
0005 TYPE-A :
Setting for using the battery selected by the menu
item No.181 TYPE-A NEAR item and No.182
TYPE-A END item
0006 TYPE-B :
Setting for using the battery selected by the menu
item No.183 TYPE-B NEAR item and No.184
TYPE-B END item