Panasonic AJ-HD1400E - Manual (Page 59)

59
Error messages
When a warning occurs in this unit, the error number is
indicated on the counter display.
Open the DIAG menu to display a description of the error on
the counter display or monitor TV.
When a operational malfunction has occurred in the unit, the
error number flashes on the counter display.
DIAG menu
This displays the VTR information.
The VTR information includes the warning information,
hours meter (usage time) information and UMID information.
The DIAG menu appears on the TV monitor when the
VIDEO OUT connector on the rear panel is connected to the
TV monitor.
Displaying the DIAG menu
1
Press the MENU button while holding down the PF
button.
The DIAG menu screen appears on the TV monitor, and
a message appears on the counter display.
2
Press the SEARCH button.
Each time this button is pressed, the display changes by
one step in the following sequence: “WARNING”
>
“HOURS METER” > “UMID INFO” > “DIF STATUS1”
> “DIF STATUS2.”
3
When the MENU button is pressed again, the original
display is restored.
Displaying the “HOURS METER” information
When the joystick is moved up or down, the cursor ( ¢) moves, and a description of the item where the cursor is located is
shown on the counter display.
<Notes>
z The resettable items in the “HOURS METER” information are reset by the dealer when maintenance work is performed.
z No operations can be performed using the SEARCH button or the joystick while the DIAG menu is displayed.
1
2 3
CH1/5 CH2/6 CH3/7 CH4/8
REC
PB
CH1 CH2 CH1 CH2 PB
NO. Item Description
Ser ¢¢¢¢¢¢¢¢¢ Displays the unit’s serial No.
H00 OPERATION Displays the time that the power has been supplied in one-hour units.
H01 DRUM RUN Displays the time that the drum has been rotating in one-hour units.
H02 TAPE RUN
Displays the duration for which the tape has been running in the FF, REW, PLAY, SEARCH (JOG,
SLOW, SHTL) and REC modes (but not in the JOG, SLOW and SHTL STILL modes) in 1-hour
increments.
H03 THREADING The number of times for threading (loading)/ unthreading (unloading) is displayed in single units.
H04 F LOADING Displays the number of times front loading has been performed in single units.
H11 DRUM RUNr Displays the time that the drum has been rotating in one-hour units. (Can be reset)
H12 TAPE RUNr
Displays the duration for which the tape has been running in the FF, REW, PLAY, SEARCH (JOG,
SLOW, SHTL) and REC modes (but not in the JOG, SLOW and SHTL STILL modes) in 1-hour
increments. (This item can be reset.)
H13 THREADINGr
The number of times for threading (loading)/ unthreading (unloading) is displayed in single units. (Can
be reset)
H14 F LOADINGr Displays the number of times front loading has been performed in single units. (Can be reset)
H30 POWER ON The number of times the power has been turned on is displayed in single units.