Panasonic AJ-HD1400E - Manual (Page 44)

44
Setup menus
(continued)
EDIT
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“_____” indicates the factory setting.
No./Item Description of setting
302* 1
CONFI EDIT
For selecting whether to perform simultaneous
playback during editing.
0000
OFF :
Simultaneous playback is not performed.
0001 ON :
Simultaneous playback is performed.
303*
1
AUD EDIT IN
For selecting how to connect the digital audio edit IN
points.
0000
CUT :
Cut processing
0001 FADE :
V-fade processing
304* 1
AUD EDIT
OUT
For selecting how to connect the digital audio edit
OUT points.
0000
CUT :
Cut processing
0001 FADE :
V-fade processing
307*
1
AFTER CUE-
UP
For selecting the VTR’s mode upon completion of the
cue-up operation.
0000
STOP :
The VTR is set to the STOP mode.
0001 STILL :
The VTR is set to the still picture (SHTL STILL)
mode.
0002 STILL2 :
The VTR is set to the still picture (VAR STILL)
mode.
320*
1
EDIT
RPLCE1
For setting the allocation of the channels for the
analog audio presets of a controller when a controller
without a function to control the edit presets of the
digital audio signals is used to edit the digital audio
signals of the VTR.
The VTR’s CH1 edit presets are set to ON or OFF
following the analog audio signals specified by the
controller.
0000
N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
321* 1
EDIT
RPLCE2
As with menu item No.320, the VTR’s CH2 edit
presets are set to ON or OFF following the analog
audio signals specified by the controller.
0000
N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
322* 1
EDIT
RPLCE3
As with menu item No.320, the VTR’s CH3 edit
presets are set to ON or OFF following the analog
audio signals specified by the controller.
0000
N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
No./Item Description of setting
323* 1
EDIT
RPLCE4
As with menu item No.320, the VTR’s CH4 edit
presets are set to ON or OFF following the analog
audio signals specified by the controller.
0000
N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.
324* 1
EDIT
RPLCEC
As with menu item No.320, the VTR’s CUE edit
presets are set to ON or OFF following the analog
audio signals specified by the controller.
0000
N-DEF :
Not set.
0001 CH1 :
The analog CH1 edit presets are followed.
0002 CH2 :
The analog CH2 edit presets are followed.
0003 CH1+2 :
The analog CH1 or CH2 edit presets are followed.