Panasonic AJ-HD1400E - Manual (Page 43)

43
Setup menus
(continued)
OPERATION (continued)
*1 Even if the RESET button is pressed while pressing the
SEARCH button, the value may not return to the factory
setting.
*2 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
INTERFACE
“_____” indicates the factory setting.
No./Item Description of setting
181* 1
TYPE-A
NEAR
For setting (in increments of 0.1 V) the voltage level at
which the counter flashes as warning for TYPE-A
battery (selected as the menu item No.180 BATTERY
SEL item).
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
10.6
: :
0023
12.9
: :
0044
15.0
<Note>
When this item has been set to a voltage level close
to 15.0 V, the counter display may flash even when an
AC power source is being used.
182* 1
TYPE-A END
For setting (in increments of 0.1 V) the voltage level at
which the TYPE-A battery (selected as the menu item
No.180 BATTERY SEL item) is to be automatically
turned off.
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
10.6
: :
0018
12.4
: :
0034
14.0
183*
1
TYPE-B
NEAR
For setting (in increments of 0.1 V) the voltage level at
which the counter flashes as warning for TYPE-B
battery (selected as the menu item No.180 BATTERY
SEL item).
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
10.6
: :
0023
12.9
: :
0044
15.0
<Note>
When this item has been set to a voltage level close
to 15.0 V, the counter display may flash even when an
AC power source is being used.
184*
1
TYPE-B END
For setting (in increments of 0.1 V) the voltage level at
which the TYPE-B battery (selected as the menu item
No.180 BATTERY SEL item) is to be automatically
turned off.
0000
10.6
: :
0018
12.4
: :
0034
14.0
190* 2
V IN SEL INH
For selection of the video input switching mode with
the INPUT SELECT switch.
0000
OFF :
Video input switching with the INPUT SELECT
switch is enabled.
0001 ON :
Video input switching with the INPUT SELECT
switch is prohibited.
0002 REC :
After this unit shifts to recording (except editing),
video input switching with the INPUT SELECT
switch is prohibited.
No./Item Description of setting
191* 2
A IN SEL INH
Select the audio input switching mode with the INPUT
SELECT switch.
0000
OFF :
Select the audio input switching mode with the
INPUT SELECT switch.
0001 ON :
Video input switching with the INPUT SELECT
switch is prohibited.
0002 REC :
After this unit shifts to recording (except editing),
video input switching with the INPUT SELECT
switch is prohibited.
No./Item Description of setting
202
ID SEL For setting the ID information to be returned to the
controller.
0000
OTHER :
The ID information of the VTR other than DVCPRO
is set.
0001 DVCPRO :
The DVCPRO ID information is set.
0002 ORIG :
Set this only when the unit is connected to a
Panasonic controller (such as the AG-A850,
optional accessory).
<Note>
Select 1 (DVCPRO) or 2 (ORIG) if “23/24,” “25(HD),”
“25(SD),” “50(HD)” or “50(SD)” is selected as the
menu item No.25 SYSTEM FREQ setting.