Panasonic AJ-HD1400E - Manual (Page 16)

16
Parts and their functions
(continued)
IEEE1394 digital input/output connector
This unit is capable of input and output through a digital
interface conforming to the IEEE1394 standard. Use 6-
pin connectors. Does not support bus power.
Reference signals
During tape playback, the video output reference signals are as shown in the table below.
*1 If “1394” or “INT SG (internal standard signal)” is selected for the video input signal, the video output reference signal will always be
“Internal HD.”
<Notes>
z When “E-AUTO” is selected in menu No. 031 OUT REF, the unit operates as if “INPUT” is selected in edit mode or “AUTO”
is selected in modes other than the edit mode.
z When using the SD > HD up-converter and HD > HD cross-converter, input the HD tri-level sync signal that supports the
HD output format in order to initiate operation using HD_REF_IN.
<Notes>
z In the 25 Hz (HD) or 50 Hz (HD) mode, black signals are output from the SD SDI output and analog composite output
connectors.
z In the 25 Hz (SD) or 50 Hz (SD) mode, black signals are output from the HD SDI output and analog component output
connectors.
z All the HD SDI output, SD SDI output, video output, analog component output, audio output and TC output signals are
output in phase with the REF input.
In the 59.94 Hz/60 Hz or 50 Hz mode
Input signals Menu item No.031
REF_IN INPUT AUTO HD_REF SD_REF INPUT*
1
HD_REF_IN
Input HD_REF_IN HD_REF_IN Internal SD INPUT
Not input HD_REF_IN HD_REF_IN Internal SD Internal HD
SD_REF_IN
Input SD_REF_IN Internal HD SD_REF_IN INPUT
Not input SD_REF_IN Internal HD SD_REF_IN Internal SD
None
Input INPUT Internal HD Internal SD INPUT
Not input Internal HD Internal HD Internal SD Internal HD
In the 23.98 Hz/24 Hz mode
Input signals
REF_IN
HD_REF_IN HD_REF_IN
None Internal HD
In the 25 Hz (HD), 25 Hz (SD), 50 Hz (HD) or 50 Hz (SD) mode
Input signals Menu item No.031
REF_IN AUTO HD_REF SD_REF INPUT
HD_REF_IN HD_REF_IN HD_REF_IN Internal SD Internal HD
SD_REF_IN SD_REF_IN Internal HD SD_REF_IN Internal HD
None Internal HD Internal HD Internal SD Internal HD
Internal HD:
With HD tape playback as the reference, operation uses a 74 MHz clock signal in the free-run mode.
Internal SD:
With SD tape playback as the reference, operation uses a 4fsc clock signal in the free-run mode.