Panasonic AJ-HD1400E - Manual (Page 28)

28
Setup (initial settings)
(continued)
3
Incline the joystick up and down to adjust the cursor in
the default settings screen to the “LOAD” position and
press the joystick. The mode for this unit changes to the
LOAD mode, the LOAD screen is displayed on the video
monitor, and the item name is displayed in the counter
display.
4
Incline the joystick up and down to adjust the cursor in
the LOAD screen to the “FACTORY” position and press
the joystick.
z If this operation is made after moving the cursor to
“FACTORY,” values for all menus except the SYSTEM
menu will return to the factory settings.
z When the cursor is moved to “NO” and this operation is
performed, the display returns to the menu screen
without restoring the factory settings.
5
The confirmation screen is displayed on the video
monitor.
z When the PLAY button is pressed, the unit returns to
the factory settings and the display of the menu screen
disappears.
z When the STOP button is pressed, the display returns
to the menu screen without changing the settings.
Setting the user defaults
1
Press the MENU button.
A select screen for major menu items is displayed on the
video monitor, and the names are displayed in the
counter display.
2
Follow the procedure described in “Setting method using
the on-screen menus” (page 27)
2–6 and adjust the
desired settings.
3
Press the RESET button.
The mode for this unit will change to the default setting
mode, and the default setting screen will be displayed on
the video monitor.
4
Incline the joystick up and down to adjust the cursor in
the default settings screen to the “SAVE” position and
press the joystick.
The mode for this unit changes to the SAVE mode, the
SAVE screen is displayed on the video monitor, and the
item name is displayed in the counter display.
5
Incline the joystick up and down to adjust the cursor on
the SAVE screen to the “USER
¢ (ALL)” position (¢
each value from 1 to 3.) and press the joystick.
z When storing a set value other than SYSTEM menu in
memory, move the cursor to “USER ¢ (NOT
SYSTEM)” ( ¢ each value from 1 to 3.) and press the
joystick.
z To cancel the operation, move the cursor to “NO” and
press the joystick.
SET-UP MENU <LOAD>
¢ NO
FACTORY
USER1(ALL)
USER2(ALL)
USER3(ALL)
USER1(NOT SYSTEM)
USER2(NOT SYSTEM)
USER3(NOT SYSTEM)
SETUP-MENU <LOAD>
FACTORY OK?
YES<PLAY>/NO<STOP>
SELECT MODE
¢ 0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
SET-UP MENU <SAVE>
¢ NO
USER1(ALL)
USER2(ALL)
USER3(ALL)
USER1(NOT SYSTEM)
USER2(NOT SYSTEM)
USER3(NOT SYSTEM)