A b c, Operations, Copying – Panasonic KX-FP250 User Manual
Page 83: Using an answering machine
83
Operations
H
e
lp
For Assistance, Call 1-800-435-7329
Copying
●
Pull the paper set lever, make sure the paper is inserted correctly
and push the paper set lever.
●
You may be programming the unit. Try to make a copy after
programming or stop the programming.
●
The glass or rollers are dirty. Clean them (p. 90).
●
The thermal head is dirty. Clean it (p. 90).
●
The film is not inserted correctly. Insert it correctly (p. 88, 89).
●
The film is not inserted correctly. Insert it correctly (p. 88, 89).
●
Some paper has instructions recommending which side to print on.
Try turning the paper over. We recommend smooth paper such as
Hammermill
Jet Print for clearer printing.
●
You may have used paper with a cotton and/or fiber content that is
over 20%, such as letterhead or resume paper. We recommend
smooth paper such as Hammermill
Jet Print for clearer printing.
●
The film is not inserted correctly. Insert it correctly (p. 88, 89).
R
R
Cause & Remedy
Problem
When you try to make a copy, the
unit beeps and the display shows
“CHECK PAPER”.
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied documents.
The copied image is distorted.
The document is not copied
properly.
The copied document is blank.
The printing quality is poor.
The printing is light.
A paper jam occurs during copying.
A B C
Original
Copy
Using an answering machine
●
Your greeting message on the answering machine is too long.
Shorten the message (up to 10 seconds).
●
The answering machine rings too many times. Set to 1 or 2 rings.
●
The silent detection feature is deactivated. Activate this feature
(p. 72).
●
Check if the answering machine is turned on and connected to the
unit properly (p. 61).
●
Set the number of rings on the answering machine to 1 or 2.
●
The remote access code on your answering machine is the same
as your fax activation code. Set a different number for each code.
●
You did not program your remote access code in your fax machine
correctly. Program the same code that is programmed on the
answering machine (p. 63).
Cause & Remedy
Problem
I cannot receive documents
automatically.
I cannot receive voice messages.
I cannot retrieve recorded voice
messages on the answering machine
from a remote location.
(continued)