Panasonic KX-TDE200 - Manual (Page 95)

• * The status will be as follows:
Ready
® Not Ready
Not Ready ® Ready
Wrap-up ® Not Ready
• The Log-in/Log-out of a specified group button light shows the current status as follows:
Off: Log-in mode
Red on: Log-out mode
• The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready mode.
The Wrap-up button light shows the current status as follows:
Off: Ready mode
Red on: Not Ready mode
Flashing red: Wrap-up mode
• In Wrap-up mode/Not Ready mode, your extension does not receive calls through any group,
even if it belongs to multiple groups.
• The last remaining logged-in extension may not be allowed to log out, depending on system
programming.
• The Supervisor extension can control the Log-in/Log-out status of other extensions.
For more information, refer to "1.3.39 ICD Group Features—Log-in/Log-out Monitor and
Remote Control".
• For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or a
Wrap-up button.
1.3.39 ICD Group Features—Log-in/Log-out Monitor and Remote
Control
An extension assigned as a supervisor (supervisor extension) can monitor the Log-in/Log-out
status of incoming call distribution (ICD) group members with the lights of corresponding DSS
buttons. The supervisor extension can change the Log-in/Log-out status of an extension by
pressing the corresponding DSS button.
To perform this operation, the supervisor has to enter incoming call queue monitoring mode
first.
Document Version 2008-10 Operating Manual 95
1.3.39 ICD Group Features—Log-in/Log-out Monitor and Remote Control