Primera Technology CD Color Printer II - Manual (Page 26)

22 Using the CD Color Printer with Windows
Calibrate
Select this button to display options for fine-tuning the position
of your printed image and the size of a CDÕs non-printable
center. This button also allows you to calibrate the offset for bi-
directional printing in the Draft Print Quality Mode. The
following gives a complete description of each of the
Calibration options.
IMPORTANT! The Image Placement values labeled on your printerÕs rear
panel must be entered into the Vertical and Horizontal boxes
prior to printing. These values have been optimized
specifically for your printer and allow images to be centered
on a CD when printed.
When facing the printer, the Vertical adjustment moves the
printed image toward the printer if a positive number is
entered and away from the printer if a negative number is
entered. The Horizontal adjustment moves the printed image
toward the left-hand side if a positive number is entered and
toward the right-hand side if a negative number is entered. The
Center Size
adjustment enlarges the non-printable center if a
positive number is entered and reduces its size if a negative
number is entered. As a rule, an adjustment of 12 pixels is
equivalent to approximately 1 millimeter. Once you have
entered the optimum calibration values, you will most likely
not need to change them again. The following diagram
illustrates exactly how each of these adjustments affect the
printed image.
510198 Fargo/CD Color PrtrII 2/26/99 12:36 PM Page 22