Primera Technology CD Color Printer II - Manual (Page 39)

4. When the second run of the print is compete, you should
have a test print that looks like the following:
5. Along the Vertical axis of the printed CD template, find the
number whose lines touch. For example, in the above
illustration, the number would be -6. Enter that number
into the Vertical box of the Calibration window. Repeat this
same step for the Horizontal axis.
6. Select the OK button. The numbers you entered will stay
the same until you change them. Your images should now
be centered when printed on a CD.
After your selections have been made, select the OK button to
save your printer driver selections and to exit the Page Setup
window. You are now ready to go to an application program
and print. All printer driver selections will stay the same until
you change them.
E. PRINTING A CD
Now that you have hooked up the printer, loaded the print
supplies, and installed the printer driver, you are ready to print
you first CD label. Follow these steps to print your first image:
1. Go to your favorite graphics application program.
2. Open or create the image file you wish to print. You will
need to create a custom page or canvas size in your
program according to the type of label you intend to create.
The following tips will help you do this:
Using the CD Color Printer with Macintosh 35
-15-12 -9 -6 -3 0 3 6 9 12 15
-15 -12 -9 -6 -3 0 3 6 9 12 15
-15
-12
-9
-6
-3
0
3
6
9
12
15
Horizontal Calibration
Find the number whose lines touch
-15
-12
-9
-6
-3
0
3
6
9
12
15
Vertical Calibration
Find the number
whose lines touch
Ver tical Calibration
Find the number
whose lines touch
Horizontal Calibration
Find the number whose lines touc h
-15
-12
-9
-6
-3
0
3
6
9
12
15
-15
-12
-9
-6
-3
0
3
6
9
12
15
-15-12 -9 -6 -3 0 3 6 9 1215
-1 5- 12 -9 -6 -3 0 3 6 9 12 15
510198 Fargo/CD Color PrtrII 2/26/99 12:36 PM Page 35