Primera Technology CD Color Printer II - Manual (Page 33)

Using the CD Color Printer with Macintosh 29
appropriate files will automatically install onto your
computer. An alert box will then display indicating that
installation is complete.
5. Click on OK to exit the installer. Driver installation is now
complete.
C. THE CHOOSER
The Chooser is a Desk Accessory in the Apple menu. Before you
can use the printer, you need to select the CD Color Printer II
driver using the Chooser. This instructs your Macintosh to send
print jobs to the CD Color Printer II instead of to some other
printer you may already have connected to your system. Refer
to the following steps to select the CD Color Printer II driver:
1. Select Chooser from the Apple menu.
2. The Chooser displays an icon for all the printer drivers
installed in the System Folder. Among these, you should see
the icon for the CD Color Printer II driver you just installed.
If you do not see the icon, go through the installation
procedure again making sure the Install driver and prefs
option is selected. Once you locate the CD Color Printer II
icon, click on the icon to select it.
3. Select either the Modem or Printer Port to indicate to which
port the serial interface cable was connected. If the Printer
port is selected, AppleTalk should remain inactive while
printing unless you are using AppleTalk through your
Ethernet port. AppleTalk does not apply when printing with
the Modem port selected.
CD Color Printer II
510198 Fargo/CD Color PrtrII 2/26/99 12:36 PM Page 29