Primera Technology CD Color Printer II - Manual (Page 7)

Getting Started 3
This illustration shows the input ports found on the rear panel
of the printer. Both a parallel and a serial interface port are
provided. If using the printer with Windows, you will use its
Parallel Interface Port. If using the printer with an Apple
¨
Macintosh, you will use its Serial Interface Port. Note that the
printerÕs auxiliary port is for factory use only unless otherwise
directed. For more information on each of the interface ports,
please refer to Appendix A.
D. APPLYING POWER
1. Locate the power cord supplied with your printer.
2. Place one end of the cord into the power port on the rear
panel of the printer.
3. Place the other end of the power cord into an available
wall outlet. Once the power cord is connected, the printer
will automatically turn ON.
Power Port
Auxiliary Port
Serial Interface Port
Parallel Interface Port
510198 Fargo/CD Color PrtrII 2/26/99 12:36 PM Page 3