Primera Technology CD Color Printer II - Manual (Page 46)

42 Interpreting the PrinterÕs Indicator Lights
Section 6: Interpreting the Printer’s
Indicator Lights
The Power and Busy LED indicator lights located on the top of
the printer can tell you a lot about what is happening inside the
printer. To accurately interpret what it means when these lights
are on, off, or flashing, please refer to the following:
Power Light Busy Light Printer
on solid off Is ready to receive a print job.
on solid on solid Is processing and printing an image.
on solid blinking slowly Has received a print job and is
waiting for you to load CD media
or has a print media jam.
If media loading is required, simply
load media into the CD Tray
according to Section 2-C and press
the
CD Tray button to resume
printing. If print media is jammed,
clear the media from the printer and
turn the printer OFF and ON to reset
for the next print job.
blinking on solid Is not receiving print data properly.
Turn the printer OFF and ON to reset
and cancel print job from your
computer. Before sending next print
job, make sure you are using a
shielded interface cable and that it is
properly connected.
both lights are flashing Has either the wrong ink cartridge or
alternately with each other no ink cartridge installed.
See Section 2-B or 2-E for more
information on changing or replacing
ink cartridges.
Power Light
Busy Light
510198 Fargo/CD Color PrtrII 2/26/99 12:36 PM Page 42