Panasonic SC-VK680 - Manual (Page 10)

RQTX0282
ENGLISH
Simple setup Simple setup
Television, antenna and AC mains lead connections
Simple setup
COMPONENT
VIDEO IN
P
B
P
R
Y
VIDEO IN
Connect the AC mains lead after all other connections are complete.
Conserving power
The unit consumes power (approx. 0.4 W) even when it is turned off with [^] (main unit: [8]). To save power when the unit is not to
be used for a long time, unplug it from the household AC power socket. You will need to reset some memory items after plugging in
the unit.
The included AC mains lead is for use with this unit
only. Do not use it with other equipment.
Do not use an AC mains lead from other equipment. •
•
Note
Please refer to “Using an
external unit” on page 32 for
more information on AUX
connection.
Insertion of Connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Appliance inlet Connector
Approx. 3.5 mm
AC mains lead
To household mains
socket
FM indoor antenna
Tape the antenna where reception is best.
Before connecting the
AC mains lead, set the
voltage.
Voltage Selector
Use a flat-head screwdriver
to set the voltage selector on
the back of the main unit to
the appropriate position for
the area in which this system
is used.
Speaker connections
Please refer to
“Home Theater—
Enjoying more
powerful sound”
on page 32 for
more information
on COAXIAL
connection.
Insert fully
e.g. Front speaker (L)
Speaker Terminal/connector colour
 Front speaker (L) White
 Front speaker (R) White
 Subwoofer Purple
Connect the speakers to the main unit with the terminals of the same
colour.
Adhesive
tape
11 10
For Southeast Asia and Thailand
SC-VK680_GAGN_EN.indb 10 5/20/2009 10:39:49 AM