Cassette tapes — play and recording, English, Recording – Panasonic SC-VK680 User Manual

Page 25

Advertising
background image

RQTX0282

ENGLISH

Cassette tapes — Play and Recording

The radio/Cassette tapes — Play and Recording

Use normal position tapes.
High position and metal position tapes can be used, but the unit
will not be able to record or erase them correctly.
Preparation
1 Wind up the leader tape so recording can begin immediately.
2 Press [7, TAPE] and then [g].

1

Press the deck [;, OPEN] on the main unit and insert

the cassette to be recorded.
The tape direction is automatically set to “F q”.

2

Press [PLAY MODE] to select the reverse mode.

: One side only records.
: Both sides record (forward  reverse)

While recording, if a track is cut off in the middle at
the end of the front side, it is re-recorded from the
beginning on the reverse side. At the end of the
reverse side, recording stops and the current track
will be interrupted.

” automatically changes to “

” when you start

recording.

3

Select the source to be recorded.

Radio

Tune to the required station.
( The radio, page 24)

Disc(s)

Insert the disc(s) you want to record.

Press [DVD/CD q] and then [g]

Recording specific disc(s) or tracks
( Program play, page 18)

Music Port

Using the Music Port, page 31

AUX

Using an external unit, page 32

USB

Connect the USB mass storage

device ( USB — Play and
Recording, page 26)

Press [q, USB] and then [g]

Recording specific tracks
( Program play, page 18)

4

Press and hold [*, REC] followed by [TAPE]

(main unit: [* REC, TAPE]) to start recording.

If the tape finishes before the disc
The disc continues playing. Press [g] (main unit: [g, –DEMO])
to stop it.

1

Press [7, TAPE] and then [g].

2

Press and hold [*, REC] followed by [TAPE]

(main unit: [* REC, TAPE]) to start recording.

Erasure prevention
Use a screwdriver or similar object to break out the tab.







To record on the tape again, cover the hole with adhesive tape.

Side A

Tab for side B

Tab for side A

Adhesive tape

Multi-channel sources are automatically down-mixed to 2
channels during recording.
The volume, sound field and quality have no effects on
recording.
You cannot open the deck while recording.
You cannot fast-forward or rewind the deck while recording.


Note

Stop recording

Erasing recordings

Recording

Cassette tapes — Play and Recording

(continued)

25

SC-VK680_GAGN_EN.indb 25

5/20/2009 10:40:53 AM

Advertising