Panasonic SC-VK680 - Manual (Page 29)

RQTX0282
ENGLISH
The following sound effects may not be available or have no effect depending on the type of source, or when microphone(s) or
headphones are inserted, or karaoke function is on or play speed is on.
You may experience a reduction in sound quality when these sound field systems are used with some sources. If this occurs, turn
the sound field system off. •
•
 Manual EQ
Create your own sound quality effects.
1
Press [SOUND] to select “M.EQ”.
2 Change the sound quality with the cursor buttons.
 Select the sound range to be adjusted with [w] or [q].
 (Within 7 seconds or so)
Adjust the level with [u , 2/REW] or [i, 1/FF].
(–3 to +3)
Repeat step 2 to set the desired sound quality.
The original display is restored on the display panel in about 3
seconds.
The changes you make are stored and automatically
recalled the next time you select “M.EQ”.
 Enhancing the bass
You can enhance low-frequency sound so that heavy bass
sound can be heard clearly, even if the acoustics of your room
are not optimal. The unit automatically selects the most suitable
setting according to the type of playback source.
Press [SOUND] to select “H.BASS” and press [q] to make
selection: H. BASS ON  H. BASS OFF
Pressing [H.BASS] on the main unit will also makes the
“H.BASS”: H. BASS ON  H. BASS OFF
 Adjusting the subwoofer
Press [SOUND] to select “SUBW LVL” and press [q] to
make selection:
Pressing [SUBWOOFER] on the main unit also changes the
setting.
 Adding an echo effect
Enjoying karaoke ( page 28)
MID BASS TREBLE
On the main unit
1 Press [MANUAL EQ].
“BASS” is selected and adjusted by turning
[– BASS CONTROL +].
2 Adjust the level for “MID” and “TREBLE” with
[2/REW/u] or [1/FF/i].
MID TREBLE
Changing the sound quality
Sound field and sound quality
Enjoy a surround-like effect when using front speakers. The
effect broadens when playing discs with surround effects and
sound seems to come from speakers on either side of you.
Press [SURROUND] (main unit: [SURROUND]).
Optimum seating position
This does not work or has less effect with some discs.
Choose “STEREO” if it causes distortion.
Do not use in combination with surround effects on other
equipment. •
•
•
Note
Surround
A. SRND STANDARD STEREO
Sound field and sound quality
Press [SOUND] to select a sound mode.
Every time you press [SOUND] on the remote control:

Preset EQ
Press [SOUND] to select “EQ” and press [q] to make selection:
HEAVY : Adds punch to rock.
CLEAR : Clarifies higher sounds.
SOFT : For background music.
EQ-OFF : Canceled (no effect is added).
M.EQ H.BASS EQ SUBW LVL ECHO
SUB W2 SUB W1 SUB W3
29
SC-VK680_GAGN_EN.indb 29 5/20/2009 10:41:19 AM