Panasonic SC-VK680 - Manual (Page 11)

RQTX0282
ENGLISH
Simple setup Simple setup
Other television connection
Simple setup
COMPONENT
VIDEO IN
P
B
P
R
Y
VIDEO IN
Antenna connections
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best. •
•
Black
Red
White
Click!
Connecting a television with a VIDEO IN
terminal
To enjoy progressive video
1. Connect to a progressive output compatible
television.
2. Set “VIDEO OUT (I/P)” to “PROGRESSIVE”, then
follow the instructions on the menu screen
( page 23, “VIDEO” menu).
VIDEO OUT terminal
Do not connect the unit through a video cassette
recorder, because the picture may not be displayed
correctly due to copy guard protection.
Turn the television off before connecting, and refer to the
television’s operating instructions.
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or
progressive output. Connection using these terminals
outputs the colour difference signals (P
B
/P
R
) and
luminance signal (Y) separately in order to achieve
high fidelity in reproducing colours. The description of
the component video input terminals depends on the
television or monitor (e.g. Y/P
B
/P
R
,Y/B- Y/R-Y, Y/C
B
/C
R
).
Connect to terminals of the same colour.
Television
(not included)
Television
(not included)
Rear panel of this unit
Rear panel of this unit
Connecting a television with COMPONENT
VIDEO IN terminals
Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during a lightning storm. •
•
Note
Run a piece of vinyl wire horizontally across a window
or other convenient location.
Leave the loop antenna connected. •
•
Use outdoor antenna if radio reception is poor.
Optional antenna connections
 AM outdoor antenna
5 to
12 m
Connect the AM loop antenna
AM outdoor antenna (not included)
75 Ω coaxial cable
(not included)
FM outdoor antenna
(not included)
 FM outdoor antenna
11 10
SC-VK680_GAGN_EN.indb 11 5/20/2009 10:39:53 AM