Pioneer VSX-817-S/-K - Manual (Page 17)

Connecting up 03
17
En
English
Français
Deutsch
Nederlands
Italiano
Español
Important
• If you connect any source component to
the receiver using a component video
input, you must also have your TV
connected to this receiver’s
COMPONENT
VIDEO MONITOR OUT jacks.
1 Connect the component video outputs of
your source to a set of component video
inputs on this receiver.
Use a three-way component video cable.
2 If necessary, assign the component video
inputs to the input source you’ve connected.
This only needs to be done if you didn’t connect
according to the following defaults:
• COMP 1 – DVD
• COMP 2 – TV
• COMP 3 – DVR
See Assigning the component video inputs on
page 45.
3 Connect the COMPONENT VIDEO
MONITOR OUT jacks on this receiver to the
component video inputs on your TV or
monitor.
Use a three-way component video cable.
Connecting to the front panel video
terminal
VSX-817 model only
Front video connections are accessed via the
front panel using the
VIDEO button. Press
VIDEO and select VIDEO input. There are
standard audio/video jacks. Hook them up the
same way you made the rear panel
connections.
• Push down on the PUSH OPEN tab to
access the front audio/video connection.
Connecting to the front panel audio
mini jack
VSX-817 model only
Front audio connections are accessed via the
front panel using the
FRONT AUDIO botton.
Press FRONT AUDIO and select F.AUDIO
input. Use a stereo mini-jack cable to connect
a digital audio player.
• Push down on the PUSH OPEN tab to
access the front audio/video connection.
FRONT AUDIO CD CD-R / TAPE / MD FM AM AUX
MCACC/ AUDIO IN AUDIO R L VIDEO
L V R
VIDEO OUTPUT
Video
camera
(etc.)
PUSH
OPE N
MCACC/ AUDIO IN AUDIO R L VIDEO
FRONT AUDIO CD CD-R / TAPE / MD FM AM AUX
MCACC/
AUDIO IN AUDIO R L VIDEO
PUSH
OPEN
MCACC/ AUDIO IN AUDIO R L VIDEO
AUDIO OUT
Portable CD player (etc.)
VSX517_817.fm 17 ページ ２００７年２月２２日 木曜日 午後８時１１分