09 controlling the rest of your system, Setting the remote to control other components, Selecting preset codes directly – Pioneer VSX-817-S/-K User Manual
Page 50: Controlling the rest of your system, Controlling the rest of your system 09, Chapter 9
Controlling the rest of your system
09
50
En
Chapter 9:
Controlling the rest of your
system
VSX-817 model only
Setting the remote to control
other components
Most components can be assigned to one of
the
MULTI CONTROL
buttons using the
component’s manufacturer preset code stored
in the remote.
However, please note that there are cases
where only certain functions may be
controllable after assigning the proper preset
code, or the codes for the manufacturer in the
remote control will not work for the model that
you are using.
Note
• After one minute of inactivity, the remote
automatically exits the operation.
Selecting preset codes directly
1
While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
2
Press the MULTI CONTROL button for the
component you want to control.
The LED lights on continuously.
3
Use the number buttons to enter the
preset code.
You can find the preset codes on page 55.
The LED blinks again after you enter the code.
If the correct code has been input the power of
the component being input will turn on or off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
• You can only input a code for the component
type written on each
MULTI CONTROL
button.
1
• Even if you don’t input a preset code for the
TV (
TV/SAT
MULTI CONTROL
button) you
will be able to control your TV using the
dedicated
TV CONTROL
on the remote if
you have assigned it to the
TV CTRL
button.
4
Repeat steps 2 through 3 to try a different
code, or to enter a code for another
component you want to control.
5
When you’re done, press RECEIVER.
MULTI CONTROL
STANDARD
PHASE
DIALOG
ADV.SURR
STEREO/
F.S.SURR
SOUND
RETRIEVER
ACOUSTIC
EQ
AUTO SURR
DVD/LD
TV/SAT
CD
DVR/VCR
FM
AM
RECEIVER
TV CTRL
CD-R/TAPE
F.AUDIO
TUNER DISP
CLASS
MPX
D.ACCESS
MIDNIGHT
ANALOG ATT
SIGNAL
SB ch
DIMMER
SLEEP
DISC
+10
INFO
TV CONTROL
TV CH
TV VOL
ENTER
INPUT
SELECT
SHIFT
Note
1 • TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the
TV/SAT
or
TV CTRL
button.
• You can’t assign the
AM
/
FM
or
RECEIVER
buttons.
VSX517_817.fm 50 ページ ２００７年２月２２日 木曜日 午後８時１１分