Pioneer VSX-817-S/-K - Manual (Page 48)

Using the tuner 07
48
En
3 Input the name you want then press ENTER.
Names can be up to four characters long.
• Use the MULTI JOG dial (front panel) or the
ST +/– (VSX-817 model) / STATION +/– (VSX-
517 model) buttons (remote) to select
characters, and ENTER to confirm. If no
character is input, a space is input.
Tip
• Once you have named a station preset, you
can press (SHIFT +) TUNER DISP (VSX-817
model) / DISPLAY (VSX-517 model) when
listening to a station to switch the display
between the name and the frequency.
Listening to station presets
You will need to have some presets stored to do
this. See
Saving station presets on page 47 if
you haven’t done this already.
1 Press AM or FM to select the tuner.
2 Press (SHIFT +) CLASS (VSX-817 model) /
CLASS (VSX-517 model) to select the class in
which the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3 Press ST +/– (VSX-817 model) / STATION +/
– (VSX-517 model) to select the station preset
you want.
Changing the frequency step
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how to
switch the setting:
1 Switch the receiver into standby.
2 On the front panel, press STANDBY/
ON while you press and hold the TUNER EDIT
button.
The channel tuning step alternates between
10K STEP and 9K STEP each time you do this.
VSX517_817.fm 48 ページ ２００７年２月２２日 木曜日 午後８時１１分