Panasonic SC-BT203 - Manual (Page 11)

11
RQT9371
Do not disconnect the video cable even if the below is connected. Some features may not be displayed.
Do not disconnect the video cable even if the below is connected. Some features may not be displayed.
Connections with a component video cable
≥Connect to terminals of the same color.
≥Set “Black Level Control” to “Darker”. (> 37)
≥Using the COMPONENT VIDEO OUT terminal, while playing DVD-Video, the video output resolution is limited to “480p”.
≥Be sure your TV supports at least 480p. Set “Component Video Resolution” to “480p”, “720p” or “1080i”. (> 39)
≥Set “High Clarity Sound” in the on-screen menu to “Off” (> 36). (Otherwise, the video will not be output.)
To enjoy high definition/progressive video
≥Connect to a TV that supports 480p or higher.
≥Set “Component Video Resolution” to “480p”, “720p” or “1080i”. (> 39)
≥Set “HDMI Video Mode” to “Off”. (> 39) Otherwise, the video is output as 480i.
Connections with an HDMI cable
≥ \BT303\ : Do not use any other HDMI cables except the supplied one.
≥Non-HDMI-compliant cables cannot be utilized.
≥[BT300] [BT200] \BT203\ : Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is
recommended that you use Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 ft), RP-CDHG15 (1.5 m/4.9 ft), RP-CDHG20 (2.0 m/6.6 ft), RP-CDHG30 (3.0 m/9.8 ft),
RP-CDHG50 (5.0 m/16.4 ft), etc.
≥This unit incorporates HDMI (Deep Color, x.v.Color TM , High Bit rate Audio) technology. (> 54, 55)
≥When outputting 1080p signal (> 39, “HDMI Resolution”), please use HDMI cables 5.0 m (16.4 ft) or less.
NECESSARY SETTINGS
“HDMI Video Mode” : “On”/“HDMI Audio Output” : “Off” (> 39)
With this connection, you can use VIERA Link “HDAVI Control” (> 28).
To enjoy TV audio from this home theater system’s speakers
*1 You can enjoy the audio from your TV through this home theater system’s speakers by connecting to the “AUX(TV)” terminal or
“OPTICAL 1(TV)” terminal. (> 27)
*2 This is the preferred connection for best sound and true surround sound.
This unit can decode the surround signals received from your TV. Refer to the operating instructions for the TV for the settings
necessary to output its audio from the digital audio output to your home theater system. Only Dolby Digital and PCM can be played
with this connection.
– After making this connection, make settings to suit the type of audio from your digital equipment (> 27).
COMPONENT VIDEO OUT
P R
P B
ANT EXT LOOP AM
GND ANT LOOP
VIDEO OUT
OPTICAL
2(STB) 1(TV)
DIGITAL IN FM ANT 75Ω
OPTICAL
2(STB) 1(T
L R
DIGITAL IN COMPONENT VIDEO OUT
Y
AUX(TV)
P R
P B
SPEAKERS
+
-
AV OUT
R L CENTER
3 Ω 3 Ω
WOOFER FRONT
6 5 2 1
R L 3 Ω
SURROUND
4 3
R L 3 Ω
SURROUNDBACK
8 7 AC IN VIDEO OUT COMPONENT VIDEO OUT
Y
P R
P B
VIDEO OUT ) (
3 Ω SUB-
L
R
AUDIO OUT
OPTICAL
OUT
COMPONENT
VIDEO IN
Y
P R
P B
AUX(TV)
OPTICAL 1(TV)
COMPONENT VIDEO OUT
Optical digital
audio cable*
1,2
(not included)
TV
Audio cable* 1
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
(
right).
Main unit
Component
Video cable
(not included)
NOTE
TIPS
1 [BT303] HDMI cable
COMPONENT VIDEO OUT
P R
P B
ANT EXT LOOP AM
GND ANT LOOP
VIDEO OUT
OPTICAL
2(STB) 1(TV)
DIGITAL IN
OPTICAL
2(STB) 1(T
L R
DIGITAL IN
COMPONENT VIDEO OUT
Y
AUX(TV)
P R
P B
SPEAKERS
-
AV OUT
R L CENTER
3 Ω 3 Ω
WOOFER FRONT
6 5 2 1
R L 3 Ω
SURROUND
4 3
R L 3 Ω
SURROUNDBACK
8 7 AC IN VIDEO OUT VIDEO OUT AV OUT
+
FM ANT 75Ω 3 Ω ) (
WOOFER SUB-
OPTICAL
OUT AV IN
L
R
AUDIO OUT
OPTICAL 1(TV)
AUX(TV)
HDMI AV OUT
Optical digital
audio cable*
1,2
(not included)
Audio cable* 1
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
(
right).
Main unit
HDMI cable
(only included
with SC-BT303)
HDMI
compatible
TV
NOTE
TIPS
TIPS
Getting s
tar
te
d
Body-1.fm 11 ページ ２００９年３月１６日 月曜日 午前１０時２４分