Network settings, Advanced operations, Setting the connection speed – Panasonic SC-BT203 User Manual
Page 34: Testing of “proxy server settings, Setting the proxy server
34
RQT9371
Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and DNS-IP
addresses are assigned, perform the following settings.
After performing steps 1 to 4 (> 33)
5 Press [
3, 4] to select “Auto Detect
Connection Speed” and press [2, 1] to select
“Off”.
6 Press [
3, 4] to select “Connection Speed
Setting” and press [2, 1] to select a
connection speed.
≥Select a connection speed in accordance with the environment of
the network connected.
≥When the settings are changed, the network connection may be
disabled depending on the device.
Testing of “Proxy Server Settings”
Always test the connection when new “Proxy Server Settings” have
been made.
1 Press [BD/SD] to select “BD/DVD” or “SD”.
2 Press [SETUP].
3 Press [
3, 4] to select “Network” and press
[OK].
4 Press [
3, 4] to select “Proxy Server Settings”
and press [OK].
5 Press [
3, 4] to select “Connection Test” and
press [OK].
“Testing...”:The test is in progress.
“Pass”:
The connection is completed.
Press [RETURN] to exit.
“Fail”:
Please check the connection and settings.
RETURN
Proxy Server Settings
Reset to factory preset
Proxy Address
Proxy Port Number
OK
0
Connection Test
Setting the proxy server
In most cases, default settings can normally be used without
making any changes.
Please use this setting when instructed to by your Internet
service provider.
After performing steps 1 to 4 (D left)
5 Press [
3, 4] to select “Proxy Address” and
press [OK].
≥The text entry screen is displayed.
Text field: shows the text you have entered
6 Press [
3, 4, 2, 1] to select a character and
press [OK].
Repeat this step to enter other characters.
≥Press [;PAUSE] to delete.
7 Press [
∫STOP] when you complete the entry.
8 Press [
3, 4] to select “Proxy Port Number”
and press [OK].
9 Enter numbers with the numbered buttons and
press [OK].
: Press [
2, 1] to select “Yes” and press [OK].
≥The specified ports may be blocked and not be able to be
used depending on the network environment.
In order to restore the default settings
After performing steps 1 to 4 (D left)
1) Press [3, 4] to select “Reset to factory preset” and
press [OK].
2) Press [2, 1] to select “Yes” and press [OK].
Using the numbered buttons to enter characters
e.g., entering the letter “F”
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight “F”.
3) Press [OK].
_
Proxy Address
Space
Finish
Delete
OK
RETURN
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
A B C
D E F
a
b
c
d
e
f
g
h
i
j
k
l
/
= %
+
-
*
# $ &
< > @
m n o
[
]
_
p
q
r
s
(
)
t
u
v
{
}
\ I
w
x
y
z
“
’
:
;
`
^
.
,
?
!
J
K
L
M N O
P Q R S
T U V
W X Y Z
0 -- 9
G H I
~
0
Proxy Port Number
Please input Proxy Server Port Number and
press [OK]. Press [CANCEL] to delete the
selected. The number will be set to
"0" if all characters are deleted and [OK] is
pressed.
Num
ber
0 - 9
TIPS
1
4
1
2
3
4
A
B
C
D
E
F
G
H
I
3
3
DEF
3
DEF
3
DEF
Advanced operations
BT300.book 34 ページ ２００９年３月２３日 月曜日 午後１時５７分