Panasonic SC-BT203 - Manual (Page 19)

19
RQT9371
Basic operations
∫ To adjust the volume.
It is also possible to adjust the volume with the volume knob on the
main unit.
∫ To mute the sound.
Instructions for operations are generally described using the remote control in these operating instructions.
Preparation
Turn on the TV and select the appropriate video input on the TV.
1 Press [ Í] to turn on the unit.
2 Insert the media. (B see above)
Play starts.
≥If play does not start, press [1PLAY].
≥If a media with data in different file formats is inserted, the file selection menu is displayed. Press [3, 4] to select the desired file format
and press [OK].
≥If a menu is displayed, press [3, 4, 2, 1] to select the item and press [OK].
≥If the screen prompting you to use the color buttons appears, continue to operate with the color buttons on the remote control.
VOLUME
SURROUND OUTPUT
TUNE SELECTOR SETUP MIC SD CARD
SELECTOR
Stop Play
,VOLUME
Skip/Search/Slow-motion
SD CARD
Headphones (not included)
Headphone plug type: ‰3.5 mm (
1 / 8 z) stereo mini plug
≥Reduce the volume before connecting.
≥Audio is automatically switched to 2-channel stereo.
≥To prevent hearing damage, avoid listening for prolonged periods of time.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Label facing up
1 Press [ < OPEN/CLOSE] to open the disc tray.
2 Insert or remove the disc.
Inserting or removing an SD card.
≥To remove the card, press on the center of the card
and pull it straight out.
≥Press [< OPEN/CLOSE] again to close the tray.
≥Insert double-sided discs so the label for the side you
want to play is facing up.
≥DVD-RAM: Remove the discs from their cartridges
before use.
Insert the card label up with
the cut-off corner on the right.
≥Press on the center of the
card until it clicks into place.
Inserting or removing a disc.
1 Pull to flip down the front panel.
2 Insert the SD card into the SD card slot.
Press to adjust the volume
Press to mute the sound
“MUTE” flashes on the unit’s
display.
≥To cancel, press [MUTE] again or
adjust the volume.
≥Muting is canceled if the unit is
turned off.
e.g.
VOL
MUTE
≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you finish to
preserve the unit’s motor and your television screen.
≥The producers of the disc can control how discs are
played. So you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
≥When playing a set of two or more BD-Video discs, the
menu screen may continue to display even if the disc has
been ejected.
To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V]
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu [BD-V]
The Pop-up menu is a special feature available with some
BD-Video discs. This menu may vary with discs. For the
operating method, refer to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press [3, 4, 2, 1] to select the item and press [OK].
≥Pop-up menu also appears by pressing [SUB MENU] and
selecting “Pop-up Menu”.
≥Press [POP-UP MENU] to exit the screen.
≥It may take time to read BD-Video discs that include BD-J
(> 54).
NOTE
TIPS
Playback
BT300.book 19 ページ ２００９年３月２３日 月曜日 午後１時５７分