Selecting a sound mode using surround sound, Selecting a sound mode, 1 press receiver – Pioneer VSX-39TX User Manual

Page 46: 2 select the sound mode, Using surround sound, Basic playback

Advertising
background image

46

1 Press RECEIVER.

This sets the remote to select the sound mode.
(You can skip this step when using the controls on
the receiver.)

2 Select the sound mode.

• For STANDARD

\ Press STANDARD

Each press changes the STANDARD mode as
follows:

STANDARD

STANDARD 7.1

STANDARD auto

• For HOME THX CINEMA

\ Press THX (or THX

CINEMA on the front panel)
Each press changes the THX mode as follows:

THX CINEMA

THX SURR EX

THX AUTO

• For ADVANCED THEATER

\ Press ADVANCED

THEATER (or ADVANCED on the front panel) )
Each press changes the ADVANCED THEATER
mode as follows:

MUSICAL

DRAMA

ACTION

5/7-D THEATER

• For DSP modes

\ Press DSP (DSP MODE)

repeatedly
Each press changes the DSP mode as follows:

5/7CH STEREO

THEATER 2

THEATER 1

HALL 1

HALL 2

JAZZ

DANCE

• For STEREO

\Press STEREO (STEREO/DIRECT)

Each press changes the STEREO mode as follows:

STEREO

DIRECT

• If you have SURROUND BACK speakers switched

on (see p.34-35) then 7-D THEATER and 7CH
STEREO will appear as such in the display on the
receiver. If these speakers are not switched on the
above two modes will appear as 5-D THEATER and
5CH STEREO.

• The effects of ADVANCED THEATER mode can be

adjusted in the range of 10 to 90 by pressing
EFFECT +/– (The default setting is 70). Also, the
effect level can be set in each ADVANCED THE-
ATER mode by pressing the EFFECT(+/–) button.

• The amount of effect of each DSP mode can be

adjusted in the range of 10 to 90 (the default
setting value is 70) by pressing EFFECT +/–.

• 5/7CH STEREO modes cannot be changed.

Selecting a Sound Mode

To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting
Up for Surround Sound” (starting on page

32) before using the sound modes. This is particularly important when

using the 2(Dolby) Digital or DTS sources. When using the sound modes, using SPEAKERS A will give the best
results. If you use SPEAKERS B the sound will be down mixed to the two front B speakers and the surround
sound effect will be lost.

Using surround sound

DSP MODE

STEREO/
DIRECT

THX CINEMA

ADVANCED

STANDARD

memo

1

RECEIVER

DVD/LD

TV/SAT

VCR1

VCR2

REMOTE

SETUP

MD/TAPE

CD

TUNER

TV

CONTROL

Receiver

MAIN

SUB

DSP

STEREO

THX

ADVANCED

THEATER

EFFECT

STANDARD

MIDNIGHT

LOUDNESS

SIGNAL

SELECT

DIGITAL

NR

/ dts

MULTI CH

IN

DSP

STEREO EFFECT +/–

THX

ADVANCED

THEATER

STANDARD

Basic Playback

Advertising