Playing sources with stereo sound, 4 press the receiver, Basic playback – Pioneer VSX-39TX User Manual
Page 48: The stereo indicator lights on the display, Signal select), The receiver main screen appears on the remote, Standby indicator
48
Playing Sources with Stereo Sound
The following instructions show you how to play audio or audio-visual sources with the VSX-39TX.
If the TAPE 2 indicator is visible in the display, it means the TAPE 2 MONITOR is on. Press TAPE 2
MONITOR on the front panel to turn it off unless you want to listen to TAPE 2.
1 Turn on the power of the playback
component.
2 Press the STANDBY/
ON button to turn on the
receiver.
Be sure that the standby indicator
turns off on the front panel.
3 Press the FUNCTION on the remote
control to select the source you
want to playback.
Alternatively, Use the INPUT SELECTOR on the front
panel.
The FUNCTION button cycles through the sources in
the following order:
4 Press the RECEIVER.
The RECEIVER MAIN SCREEN appears on the
remote.
5 Press the STEREO button to select
the stereo mode.
The STEREO indicator lights on the display.
6 Press SIGNAL SELECT to select the
input signal corresponding to the
source component (setting the
switch to AUTO assures the proper
signal will be selected).
(See “Switching ANALOG/DIGITAL Signal Input” on
the next page.)
7 Start playback of the component
you selected in step 1.
8 Adjust the volume by using the
MASTER VOLUME buttons on the
remote control or the MASTER
VOLUME on the front panel.
Return to the RECEIVER screens (by pressing to
RECEIVER button and SUB, if needed) to make other
sound adjustments like bass/treble, loudness etc.
8
3
2
6
(SIGNAL SELECT)
2
4
3
6
8
+
VOL
+
ENTER
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
FUNCTION
TV
CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION
STANDBY/ON
–
VOL
–
CH
–
CH
+
FUNCTION
BACK LIGHT
use lock
on/off
+
VOL
+
ENTER
RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
FUNCTION
TV
CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION
STANDBY/ON
–
VOL
–
CH
–
CH
+
FUNCTION
BACK LIGHT
use lock
on/off
Receiver
MAIN
SUB
DSP
STEREO
THX
ADVANCED
THEATER
EFFECT
STANDARD
MIDNIGHT
LOUDNESS
SIGNAL
SELECT
DIGITAL
NR
/ dts
MULTI CH
IN
memo
memo
DVD/LD
TV/SAT
CD
VIDEO
VCR 1
PHONO
MD/TAPE 1
TUNER
VCR 2
Basic Playback
STANDBY
indicator
5
5
If you are not able to get sound from the
receiver the problem may well lie with the
SIGNAL SELECT switch. You need to
make sure the input is set to the appropri-
ate ANALOG or DIGITAL setting. Refer to
page 49 for more on this.