Pioneer VSX-39TX - Manual (Page 69)

69
OPERA
TION
Remote Control of Other Components
STB (satellite tuner) operations
• The following operations are available from the receiver's remote control after you program
your satellite tuner into it, but some operations may need to be learned separately by the
receiver (see “Setting Up the Remote Control to Control Other Components,“ p.58-61).
• To perform these operations, press the TV/SAT button to set the remote to the SAT operation mode.
• For more information on individual commands consult the manual that came with the component.
• When presetting a satellite tuner other than one made by PIONEER, screen1 will appear.
• When presetting a PIONEER satellite tuner, screen 2 will appear.
Satellite Tuner screen 1
Satellite Tuner screen 2
1
Press to switch the satellite tuner on or off (not
possible with all models, especially those without
a standby mode).
2 EXIT
Press to exit the current setting of the SAT.
3 OFF/ON
Press to switch the satellite tuner off.
4 CH –/+
Use to change channels on the satellite tuner.
5 GUIDE
Use to turn the program information screen on or
off.
6 MENU
Use to turn the main menu on or off.
7 Number buttons
Use to select satellite channels.
8 L1-3
Freely assignable keys where you can enter any
command you like-refer to p.60-61 for more on
this.
memo
STB (SAT)
1 2
4
7 8 9
5 6
3 MENU GUIDE
CH CH
L2 0 L3
OFF /ON EXIT
L1
1
2
8
7 5
4
3
6
STB (SAT)
1 2
4
7 8 9
5 6
3
EXIT
D E
0 L1
A B C
L2
GUIDE MENU
2
4
7
1
3
6
5
1
Press to switch the satellite tuner on or off (not
possible with all models, especially those without
a standby mode).
2 A/B/C/D/E
Use to make selections from the SAT menu.
3 MENU
Use to turn the main menu on or off.
4 GUIDE
Use to turn the program information screen on or
off.
5 Number buttons
Use to select satellite channels.
6 L1-2
Freely assignable keys where you can enter any
command you like-refer to p.60-61 for more on
this.
7 EXIT
Press to exit the current setting of the SAT.