Pioneer VSX-39TX - Manual (Page 67)

67
OPERA
TION
Remote Control of Other Components
TV operations
• The following operations are available from the receiver's remote control after you program
your TV into it, but some operations may need to be learned separately by the receiver (see
“Setting Up the Remote Control to Control Other Components,“ p.58-61).
• To perform these operations, press the TV/SAT or TV CONTROL button to set the remote to the TV
operation mode.
• For more information on individual commands consult the manual that came with the your TV.
• The "Standard" screen will appear when presetting the TV/SAT (or any other) function button. When
presetting the TV CONTROL function button the "Digital" TV screen will appear.
Standard TV screen Digital TV screen
You can operate your TV by using the
TV control buttons as well.
TV CONTROL
buttons
TV
1 2
4
7 8 9
5 6
3 GREEN
YELLOW
CHANNEL
RETURN
ANT
BLUE RED
MENU
ENTER 0
MUTE
DTV
MENU
L1
DTV
ON/OFF
9
1
2
3
5
4
6
7
8
0
TV
1 2
4
7 8 9
5 6
3
TV
FUNCTION
ANT MENU MUTE
ENTER
CH CH
0
VOL VOL
L1
0 9 8
7 4
3
2
1
5
6
VOL +
REMOTE
SETUP
MD/TAPE1
CD
TUNER
TV
CONTROL
FUNCTION
TV
CONTROL
VOL —
CH —
CH +
FUNCTION
use lock
memo
memo
1
Press to switch the TV on or off (not possible with
all models, especially those without a standby
mode).
2 MENU
Use to select different menus on a DTV screen.
3 ANT
Use to select the type of antenna you have hooked
up to your TV.
4 MUTE
Press to mute or restore the volume.
5 VOL (–/+)
Press to control the volume of the TV.
6 CH (–/+)
Use these buttons to change the channel of the
TV.
7 Number buttons
Use to select a specific TV channel.
8 ENTER
Use to select the channel specified with the
number buttons (not all models require this step).
9 L1
A freely assignable key where you can enter any
command you like—refer to p.60-61 This receiver
is capable of playing back advanced DVD discs
which are recorded in 96 kHz/24 bit format (these
are all stereo discs) and any source recorded in 96
kHz and up to 24 bit-for more on this.
0 TV FUNCTION
Press TV FUNCTION to select the TV for remote
control operation.
- 5˜∞˜2˜3˜ENTER
5˜∞˜2˜3 : Use to select or adjust items on the
menu screen.
ENTER : Use to activate the selected function.
1 DTV ON/OFF
Press to switch the DTV mode on or off.
2 MUTE
Press to mute or restore the volume.
3 DTV MENU
Press to select the DTV menu.
4 ANT
Use to select the type of antenna you have hooked
up to your TV.
5 MENU
Use to select different menus on a DTV screen.
6 BLUE/GREEN/RED/YELLOW
Use to make selections from the DTV menu.
7 Number buttons
Use to select a specific TV channel.
8 ENTER
Use to select the channel specified with the
number buttons (not all models require this step).
9 CHANNEL RETURN
Use to return to the previous channel.
0 L1
Freely assignable key where you can enter any
command you like-refer to p.60-61 for more on
this.
- 5˜∞˜2˜3˜ENTER
5˜∞˜2˜3 : Use to select or adjust items on the
menu screen.
ENTER : Use to activate the selected function.
ENTER
VCR2
STANDBY/
BACK LIGHT
on/off
-
ENTER
VCR2
STANDBY/
BACK LIGHT
on/off
-