Panasonic AG-AC7P - Manual (Page 41)

41
VQT3Q78
4 (Only when setting the region of your travel destination)
Select [DESTINATION] and press the button in the center.
≥ Select [ENTER] and press the button in the center.
≥ When the home region is set for the first time, the screen for selecting home/travel
destination appears after setting the home region successively. If the home region has
already been set once, execute the menu operation for step 1.
5 (Only when setting the region of your travel
destination)
Select your travel destination using
the cursor button right or left, then
select [ENTER] and press the button
in the center.
≥ Select [SUMMER TIME SET] and press the
button in the center to set daylight saving
time.
appears and the summer time
setting is turned on. The travel destination
time and time difference from the home
region time are set forward by one hour.
Select [SUMMER TIME SET] and press the
button in the center again to return to the
normal time setting.
≥ Close the setting by pressing the MENU button. appears and the time of the travel
destination is indicated.
To return the display to the home setting
Set the home region using step 1 to 3, and close the setting by selecting [EXIT], then press
the button in the center or pressing the MENU button.
≥ If you cannot find your travel destination in the area shown on the screen, set it by using
the time difference from your home region.
It is possible to change the date and time display mode.
It is possible to change the date format.
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥ The power save function will not activate when:
j connected to AC adaptor
j using the USB cable for PC etc.
j PRE-REC is used
[DATE/TIME] [OFF]/[D/T]/[DATE]
[DATE FORMAT] [Y/M/D]/[M/D/Y]/[D/M/Y]
[ECONOMY] [OFF]/[5 MINUTES]
C The local time at the selected
travel destination
D The time difference between
the travel destination and the
home region


AG-AC7P-VQT3Q78_mst.book 41 ページ ２０１１年５月１８日 水曜日 午後１時４０分